Butterfly Valves- Model 2400
2-Way and 3-Way - Compact, Low Cost,Plast-A-Vane® Disc Service to 150 PSI (10.3 Bar) (WOG) at 225° F (107° C)
Complete butterfly valves with actuators for quick and easy selection. Corrosion and abrasion resistant butterfly valves are rated 150 PSIG (10.3 bar) and 225° F (107° C). Available in wafer or lug styles for pipe sizes 2" through 16". Features bubble tight sealing using extremely durable corrosion resistant Plast-A-Vane® disc (2" to 10"). Plast-A-Vane® is manufactured from Noryl® . GE's glass filled thermoplastic resin. It is virtually unaffected by corrosive media such as acids and bases. The uniquely designated ribbed disc creates many small vortex trails that dissipate quickly after exiting the valve and it yields lower pressure drop and noise level than conventional unribbed discs. Lower pressure drop allows use of smaller actuators for a less expensive and more compact total package. Heat-treated 17-4 Ph stainless steel one piece thru-shaft design ensures reliability and positive disc positioning. EPDM seat assures tight seat-off while providing resistance to corrosive and abrasive material. Positive lever lock handle (locks every 10"), gear operated actuator, electric, pneumatic rack and pinion or piston style actuators make this valve ideally suited for precision throttling of corrosive chemicals at elevated temperature. Optional BUNA-N or Viton seat O-Rings are available.
For general purpose use plans HVAC applications, EPDM seat/O-ring and Noryl® Plast-A-Vane® discs are offered for temperatures to 225° F (107° C) and 150 PSI (10.3 bar).
For oil and hydrocarbon processing applications, BUNA-N seat/O-ring and Noryl® Plast-A-Vane® disc are offered for temperatures to 180° F (82° C) and 150 PSI (10.3 bar). For added corrosion resistance, Viton seat/O-ring and Noryl® Plast-A-Vane® discs are offered for temperature to 225 ° F (107° C). For high temperature service, Viton seats/O-rings and stainless steel discs are offered for temperatures 300° F (149° C).
Wafer type body is designed for use between 150 PSI (10.3 bar) ANSI B16.5 or 125PSI ANSI B16.1 flanges, raised or flat face. All sizes meet industry face to face standards allowing simple retrofit. All valves made in America and bubble tested to 150 PSI (10.3 bar) before shipment.
| Sizes: | 2" to 16" pipe; water or threaded lug bodies |
|---|---|
| Body: | Cast iron or aluminum |
| Bearing: | Three large luberized bronze (oilite) |
| Disc: | 2" to 10" Plast-A-Vane® 30% glass filled Noryl®; 12" to 16" epoxy coated iron for 225° F (107° C) service. Stainless steel disc optional for 300° F (149° C) service |
| Seat and O-Ring: | Two O-rings provide redundant shaft sealing between valve and actuator. Specify BUNA-N (nitrite) for 180° F (82° C) service. Specify EPDM or Viton for 225° F (107° C) service. Viton optional for 300° F (149° C) service with stainless steel disc only; Viton not recommended for steam service. |
| ELECTRIC: | |
|---|---|
| Temperature: | -20° F (-28.9° C) to 140° F (60° C) |
| Power Voltage: | 20VAC |
| Standard Features: | Manual Override Handwheel Heater; Position Indicator, NEMA-4 enclosure (2) Travel limit switches, (2) Position limit switches |
| Available Options: | Additional limit switches, 4-20 mA modulating input, 24 VDC, 220VAC power voltage, NEMA 7 enclosure |
| Temperature: | -20° F (-28.9° C) to 140° F (60° C) |
|---|---|
| Connections: | 3/16" nipple for ¼" O.D. tubing |
| Spring Range: | 8-13 PSI (.55-.90 bar) |
| Supply Pressure: | 0 to 20 PSIG (0-1.4 bar) (normal operating) 30 PSIG (2.1 bar) maximum |
| Available Options: | Positive positioner, 60° maximum disc rotation |
| Temperature: | -10° F (-23.3° C) to 195° F (90.6° C) |
|---|---|
| Connections: | 1/8" pipe |
| Supply Pressure: | 80 PSIG (5.5 bar) (normal operating) 150 PSIG (10.3 bar) maximum |
| Available Options: | Spring Return, mounted complete with solenoid, positioner, limit switches |
| OPTIONS: | Consult factory for Barber-Colman, Johnson Controls, Honeywell, Landis & Gyr or Robertshaw actuators factory mounted on 2- and 3-way valves; solenoids, positioners, limit switches, hydraulic actuation and marine applications. |
SUGGESTED SPECIFICATIONS
Valves shall be butterfly type, wafer or lug style, in sizes (2, 2 ½,3,4,5,6,10,12,14,16 inch) tested to 150 PSIG (10.3 bar) bubble tight, before shipment. O-Rings and seats (or liner) to be (EPDM, BUNA-N, Viton) with non-galvanic and non-conductive disc of Noryl® (or stainless steel). Actuation to be by minimum ten inch level handle with positive lock (every 10 °s), worn gear operator with 6, 9, or 12 inch diameter hand wheel, electric, piston style pneumatic, or rack and pinion style pneumatic. Valve shall be W.E. Anderson Model No. ________.
| SERVICE PRESSURE | |||||||
|---|---|---|---|---|---|---|---|
| Size | O PSI | 25 PSI | 50 PSI | 76 PSI | 100 PSI | 125 PSI | 150 PSI |
| 2 21/2 3 4 5 6 8 10 12 14 16 |
45 76 135 225 495 525 900 1500 1938 3600 4200 |
60 94 150 300 570 600 1213 2295 2613 4675 4875 |
75 125 180 345 675 750 1525 2550 2838 5750 6250 |
90 144 195 375 725 900 1838 3300 3500 6825 8025 |
105 150 210 450 782 1050 2150 3750 4306 7900 10050 |
120 157 225 495 875 1125 2463 4200 4815 8975 12375 |
135 165 240 525 975 1275 2775 4800 6000 10050 15300 |
| For unlined values torque figures are 25% less and 3-way valves torque figures are 20% higher than torque figures shown. Tested at 70°F (21°C) with water. | |||||||
| 2 | 02 | WFB | 2 | 5 | 1 | 2 | E1 | A | |
|---|---|---|---|---|---|---|---|---|---|
| 2 3 |
2-Way Valve 3-Way Valve |
||||||||
| 02 25 03 04 05 06 08 10 12 14 16 |
2" Pipe Size 2 ½" Pipe Size 3" Pipe Size 4" Pipe Size 5" Pipe Size 6" Pipe Size 8" Pipe Size 10" Pipe Size 12" Pipe Size 14" Pipe Size 16" Pipe Size |
||||||||
| WFB WFA LTB LTA LDB LDA |
Cast Iron Wafer Body, Elastomer Lined Cast Iron Wafer Body, Unlined Cast Iron Lug Body, Threaded, Elastomer Lined Cast Iron Lug Body, Threaded, Unlined Cast Iron Lug Body, Drilled, Elastomer Lined Cast Iron Lug Body, Drilled, Unlined |
||||||||
| 2 3 7 8 |
17/4 Ph Stainless Steel Stem, Standard (2-10") 304 Stainless Steel Stem, Standard (12-16") 17/4 Ph Stainless Steel Stem, Long Length (2-10") 304 Stainless Steel Stem, Long Length (12-16") Required for pneumatic (piston-style) |
||||||||
| 3 5 6 |
CF-8M Stainless Steel Disc Noryl© Disc. (2" to 10") Epoxy-Coated Iron |
||||||||
| 1 2 3 |
EPDM Seat/O-Ring BUNA-N Seat/O-Ring Viton Seat/O-Ring |
||||||||
| 0 1 2 6 7 |
Bare Stem Hand Lever Operator Gear Operated with Handwheel Electric Pneumatic |
||||||||
| 00 E1 E2 E3 E4 P1 P2 P3 P4 D1 D2 D3 D4 D5 D6 D7 D8 |
Not applicable (Manual Operator) 2", 21/2" & 3" Electric Actuator 4", 5" & 8" Electric Actuator 8", 10" & 12" Electric Actuator 14", & 16" Electric Actuator 2" & 2 ½" Piston Style Pneumatic Actuator 3" Piston Style Pneumatic Actuator 4" Piston Style Pneumatic Actuator 5" & 6" Piston Style Pneumatic Actuator 2" & 2 ½" Double Acting Pneumatic Actuator 3" Piston Style Pneumatic Actuator 4" Piston Style Pneumatic Actuator 5" Piston Style Pneumatic Actuator 6" Piston Style Pneumatic Actuator 8" Piston Style Pneumatic Actuator 10" & 12" Piston Style Pneumatic Actuator 14" & 16" Piston Style Pneumatic Actuator |
||||||||
0 A C E G I K R |
VALVE ARRANGEMENT AND POSITION Not Applicable (Manual Operator) 2-Way, Normally Open (NO) 2-Way, Normally Closed (NC) 3-Way, Common/NO/NC 3-Way, Common/NC/NO 3-Way, NO/Common/NC 3-Way, NC/Common/NO Other (Please Specify) |
||||||||
| Options: For materials other than above, consult factory. Electric and pneumatic actuators sized for 100 psi in line pressure on 2-way, 75 psi on 3-way for full 90° opening. Consult factory for other options. |
|||||||||
| DEGREE OPENING | FULL OPEN | |||||
|---|---|---|---|---|---|---|
| Size | 30° | 40° | 50° | 60° | 70° | 90° |
| 2 2 ½ 3 4 5 6 8 10 12 14 16 |
14 25 38 63 100 140 250 420 641 883 1147 |
23 44 66 110 180 250 440 710 1082 1605 2065 |
36 70 110 180 280 400 590 1174 1790 2523 3211 |
63 110 170 280 450 640 1100 1802 2748 3899 5113 |
105 180 280 460 740 1100 1800 3059 4663 6423 9712 |
130 320 500 820 1300 1900 3200 5462 8326 11470 14311 |
| Cv is the number of U.S. GPM of 60°F water that will pass through the valve with a 1 PSI pressure drop. | ||||||
| PIPE SIZE | WAFER STYLE CAST IRON BODY PLAST-A-VANE© DISC EPDM SEAT AND O-RING | LUG STYLE CAST IRON BODY PLAST-A-VANE© DISC EPDM SEAT AND O-RING |
|---|---|---|
| 2-WAY LEVER LOCK HANDLE | ||
| 2" 2 ½' 3" 4" 5" 6" |
202WFB2511000 225WFB2511000 203WFB2511000 204WFB2511000 205WFB2511000 206WFB2511000 |
202LTB2511000 225LTB2511000 203LTB2511000 204LTB2511000 205LTB2511000 206LTB2511000 |
| 2-WAY GEAR OPERATED | ||
| 4" 5" 6" 8" 10" |
204WFB2512000 205WFB2512000 206WFB2512000 208WFB2512000 210WFB2512000 |
204LTB2512000 205LTB2512000 206LTB2512000 208LTB2512000 210LTB2512000 |
| 2-WAY ELECTRIC ACTUATOR | ||
| 2" 2 ½" 3" 4" 5" 6" 8" 10" |
202WFB2516E1C 225WFB2516E1C 203WFB2516E1C 204WFB2516E2C 205WFB2516E2C 206WFB2516E2C 208WFB2516E2C 210WFB2516E2C |
202LTB2516E1C 225LTB2516E1C 203LTB2516E1C 204LTB2516E2C 205LTB2516E2C 206LTB2516E2C 208LTB2516E2C 210LTB2516E2C |
| 3-WAY ELECTRIC ACTUATOR | ||
| 2" 2 ½" 3" 4" 5" 6" 8" 10" |
302WFB2516E1E 325WFB2516E1E 303WFB2516E1E 304WFB2516E2E 305WFB2516E2E 306WFB2516E2E 308WFB2516E2E 310WFB2516E2E |
302LTB2516E1E 325LTB2516E1E 303LTB2516E1E 304LTB2516E2E 305LTB2516E2E 306LTB2516E2E 308LTB2516E2E 310LTB2516E2E |
| 2-WAY PISTON STYLE PNEUMATIC ACTUATOR | ||
| 2" 2 ½' 3" 4" 5" 6" |
202WFB7517P1C 225WFB7517P1C 203WFB7517P2C 204WFB7517P3C 205WFB7517P4C 206WFB7517P4C |
202LTB7517P1C 225LTB7517P1C 203LTB7517P2C 204LTB7517P3C 205LTB7517P4C 206LTB7517P4C |
| 3-WAY PISTON STYLE PNEUMATIC ACTUATOR | ||
| 2" 2 ½' 3" 4" 5" 6" |
302WFB7517P1E 325WFB7517P1E 303WFB7517P2E 304WFB7517P3E 305WFB7517P4E 306WFB7517P4E |
302LTB7517P1E 325LTB7517P1E 303LTB7517P2E 304LTB7517P3E 305LTB7517P4E 306LTB7517P4E |
| 2-WAY RACK AND PINION STYLE PNEUMATIC ACTUATOR | ||
| 2" 2 ½' 3" 4" 5" 6" 8" 10" |
202WFB7517D1C 225WFB7517D1C 203WFB7517D2C 204WFB7517D3C 205WFB7517D4C 206WFB7517D5C 208WFB7517D6C 210WFB7517D7C |
202LTB7517D1C 225LTB7517D1C 203LTB7517D2C 204LTB7517D3C 205LTB7517D4C 206LTB7517D5C 208LTB7517D6C 210LTB7517D7C |
| 3-WAY RACK AND PINION STYLE PNEUMATIC ACTUATOR | ||
| 2" 2 ½' 3" 4" 5" 6" 8" 10" |
302WFB7517D1E 325WFB7517D1E 303WFB7517D2E 304WFB7517D3E 305WFB7517D4E 306WFB7517D5E 308WFB7517D6E 310WFB7517D7E |
302LTB7517D1E 325LTB7517D1E 303LTB7517D2E 304LTB7517D3E 305LTB7517D4E 306LTB7517D5E 308LTB7517D6E 310LTB7517D7E |
| Standard units above have bronze (olite) bearings and 316 SS vane connection screws. 2-way valves are positioned normally closed. 3-way valves are positioned common/normally open/normally closed. Consult factory for other options. | ||