Air Flow Switch- Model 530
Adjustable from 400-1600 FPM Stainless Steel Vane
The Model 530 Air Flow Switch provides excellent sensitivity and reliability at a very reasonable price. Quality features include a rugged die cast body, stainless steel vane and SPDT snap switch. Unit is field adjustable from 400 - 1600 FPM. Mounting is fast and simple, with only two screws needed. Vane fits 6 in. or larger ducts.
SUGGESTED SPECIFICATIONAir flow switches shall be operated by a 7 ½" SS vane actuating a SPDT snap switch. Vane motion shall be restrained by a calibrated spring adjustable to the exact actuation point required. Vane motion shall be transmitted to the switch by direct mechanical linkage. Switch shall be Dwyer Instruments, Inc. Model No. 530.
PHYSICAL DATA
| Adjustable Range: | 400 - 1600 FPM (300 - 1600 with vane vertical, pointing up) |
|---|---|
 Electrical: ½" HP: |
125 VAC - 9.8 amp full load 58.8 amp locked rotor 250 VAC - 4.9 amp full load 29.4 amp locked rotor Pitot Duty Rating: 470 VA at 125, 250 VAC Resistive: 15 amp at 125, 250, or 480 VAC |
| Temperature: | Maximum 180°F (82°C) |
| Wiring Connections: | 3 screw type; common, normally open and normally closed |
| Conduit Connection: | ½" NPT female |
| Housing: | Aluminum die casting with chemical conversion coating for corrosion protection; steel stamping, zinc plated |
| Gasket: | Silicone rubber |
| Vane: | Stainless steel |
| Installation: | Mount in any position in horizontal duct |
| Duct Size: | 6 in. or larger |
| Weight: | 1 lb., 1 oz. |
CAUTION: FOR USE ONLY WITH AIR OR NON-COMBUSTIBLE NON-CORROSIVE GASES. UNIT IS NOT SEALED AGAINST DUST.