Pneumatic Lever Motors - Series 40VF
Wide Selection of Travels and Forces - On-off - Throttling Control
| Model Size |
A In. (mm) |
B In. (mm) |
C In. (mm) |
D In. (mm) |
E In. (mm) |
F In. (mm) |
G In. (mm) |
H In. (mm) |
I In. (mm) |
|---|---|---|---|---|---|---|---|---|---|
| 40VF5 | 6 3/8 (161.9) |
3 3/16 (81.0) |
1 1/2 (38.1) |
5 1/4 (133.4) |
4 1/4 (108.0) |
17 1/16 (433.4) |
7 3/4 (196.9) |
4 (101.6) |
19 9/32 (489.7) |
| 40VF6 | 7 3/16 (182.6) |
4 (101.6) |
1 1/2 (38.1) |
6 5/16 (160.3) |
5 1/4 (133.4) |
19 15/16 (506.4) |
10 5/8 (269.9) |
4 (101.6) |
18 27/32 (478.6) |
| 40VF7 | 9 23/32 (246.9) |
6 1/2 (165.1) |
1 1/2 (38.1) |
7 9/16 (192.1) |
6 11/16 (169.9) |
25 29/32 (658.0) |
13 3/8 (339.7) |
4 7/8 (123.8) |
20 5/32 (512.0) |
CAUTION: Use of an actuator supply gas other than air can create a hazardous environment because a small amount of gas continuously vents to atmosphere.
W.E. Anderson Pneumatic Lever Motors are extremely versatile energy transmission devices providing superior control in the operation of dampers, louvers, rotary shafts, butterfly valves, etc. Strokes may be easily adjusted to combine with special pneumatic control signals for demanding applications.
STANDARD MODELS
| MODEL NUMBER | A In. 2 (CM2) | Ta In. (MM) | K-LBF/In. (KGF/MM) |
|---|---|---|---|
| 40VF51003 40VF52003 40VF53003 40VF61003 40VF62003 40VF63003 40VF71003 40VF72003 40VF73003 |
20 (129) 20 (129) 20 (129) 45 (290) 45 (290) 45 (290) 80 (516) 80 (516) 80 (516) |
1 1/8 (28.6 ) 1 1/8 (28.6) 1 1/8 (28.6) 1 1/2 (38.1) 1 1/2 (38.1) 1 1/2 (38.1) 2 1/2 (63.5) 2 1/2 (63.5) 2 1/2 (63.5) |
100 (1.79) 180 (3.21) 260 (4.64) 100 (1.79) 180 (3.21) 260 (4.64) 100 (1.79) 180 (3.21) 260 (4.64) |
PHYSICAL DATA
| CONNECTIONS: | |
|---|---|
| Air Supply: | 1/4" NPT |
| Lever: | 5/16" (7.94mm) diameter hole, 3/8" (9.53mm) width on 40VF5 & 40VF6; 3/8" (9.53mm) diameter hole, 1/2" (12.7mm) width on 40VF6 |
| MAXIMUM TEMPERATURE: | 180°F (82°C) |
| MAXIMUM AIR PRESSURE: | 50 PSI (3.5 KG/CM2) |
| ACTION: | Air-To-Lower |
| MATERIALS OF CONSTRUCTION: | |
| Diaphragm: | Molded BUNA-N rubber, nylon reinforced |
| Housing, Frame & Lever: | Steel with baked enamel finish |
| Spring: | Plated spring steel |
| Push Rod: | Plated cold-rolled steel |
| Spring Adjustment: | Plated cold-rolled steel, ball thrust bearing |
| Lever Pivots: | Phosphor bronze, alignment-reamed |
| OPTIONS: | Factory-installed and calibrated PrecisorÒ Positioner, Custom calibrations: Air-To-Raise Action |