Differential Pressure Transmitter- Series 607
Ranges from 0-0.1% w.c. Accuracy ±0.5% F.S.
Series 616 Transmitters feature execptional ±0.5% accuracy in several factory calibrated ranges. Choose the one just right for your application. Span and Zero controls included for fine tuning and minor re-calibration in the field.
| Maximum Pressure: | 10 psig (0.7kg/cm²) |
|---|---|
| Media Compatibility: | Air and non-conductive, non-corrosive gases |
| ELECTRICAL | |
| Power Supply: | 13-36 VDC unregulated |
| Output Signal: | 4-20 mA DC, two wire |
| Loop Resistance: | 0-1045 ohms Vmin.= 13V + [(.0222A)(R_) |
| Current Consumption: | 3.6 mA (min.) |
| Warm-Up Time: | 15 seconds |
| TEMPERATURE LIMITS | |
| Operating: | (10-95% Rh, non-condensing_ -20 to 160°F (-29 to 71°C) |
| Compensated: | 35 to 135°F ( -40 to 82°C) |
| Storage: | -40 to 180°F (-40 to 82°C) |
| PERFORMANCE AT 70°F (21°C) |
|
| Output at zero: | 4 mA |
| Output at full span: | 20 mA |
| Accuracy: | (Includes linearity, hysteresis, and repeatability) ±0.5% of full span output |
| Stability: | ±1% of full span/year |
| Response Time: | 250 msec maximum |
| MECHANICAL | |
| Housing: | Stainless steel (NEMA-2) |
| Pressure Connections: | Barbed, stainless steel for ¼" I.D. tubing |
| Weight: | 14 oz. (397 g) |
| Span and Zero: | Barbed, stainless steel for ¼" I.D. tubingFactory set to specified range. Externally accessible for fine adjustment. Non-interactive |
| Model Number | Range, in w.c. | Model Number | Range, in w.c. | |
|---|---|---|---|---|
| 607-0 607-1 607-2 607-3 607-4 607-7 607-8 |
0-.10 0-.25 0-.50 0-1.0 0.2.0 0-5.0 0-10 |
607-9 607-0B 607-1B 607-2B 607-3B 607-4B 607-7B |
0-25 .10-0-.10 .25-0-.25 .50-0-.50 1.0-0-1.0 2.0-0-2.0 5.0-0-5.0 |
SUGGESTED SPECIFICATIONS
Differential pressure transmitters shall employ a (piezoresistive - 606,606B)(variable capacitance - 607) transducer with micro-machined silicon diaphragm. Electrical signal shall be conditioned to a (3 wire-606)(2 wire-606B, 607) 4-20 mA output. Units shall be factory calibrated to (±1% - 606, 606B)(±0/5% - 607)F.S.O. with (zero - 606, 606B)(zero & span - 607) controls for field adjustment. Tranmitters shall be Dwyer Instruments, Inc. Catalog No. (606)(606B)(607)-___for the required operating ranges.