Mark II Molded Plastic Manometers- Series 25- 40
3% Accuracy for Stationary and Portable Applications at Minimum Cost
Fig. 13-1, Mark II Model No. 25Inclined-vertical
manometer.(shown with optional A-612 portable stand)
Fig. 13-2, Mark II Model No.
40-1Inclined manometer |
Construction - Mark II manometers are economically prices, compact and available in both stationary and portable configurations. Portable stand is standard on Model 40, available as optional A-612 stand for Model 25. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof "O" ring seals. Moderate overpressures are accommodated by an overflow tank incorporated in the Model 25. Greater protection is provided by float operated overflow traps in the Model 40. Scales are lithograph printed on aluminum and epoxy coated.
Installation - Mark II manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.
Accessories - Included with each Mark II manometer are two tubing connectors for 1/8" pipe or sheet metal ducts, two mounting screws, ¾ oz. Bottle of indicating fluid, red and green pointer flags and complete instructions. The Model 25 also includes 8' of flexible double column plastic tubing. Portable operation of the Model 25 is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the Model 25 pressure connections to contain the gage oil in transit. The Model 40 contains two 4 ½' lengths of clear plastic tubing, a plastic swing-out stand and leveling screw for portable operation. It also features convenient rapid shutoff pressure connections and integral overpressure safety traps.
OEM Specials - All Dwyer Mark II molded plastic manometers can be supplied on OEM quantities with your name or special graphics and scales.
MODEL CHART (25-26-27-28-(MM-80)-(MM-180)-(M-700Pa)
| Model | Range | Fluid Used |
|---|---|---|
| 25 | 0-3 in w.c. | Red oil, .826 s.g. |
| 26 | 0-7 in w.c. | Blue oil, 1.91 s.g. |
| 27* | 0-7000 fpm | Red oil, .826 s.g. |
| 28* | 0-10,500 fpm | Blue oil, 1.91 s.g. |
| MM-80 | 0-80 mm w.c. | Red oil, .826 s.g. |
| MM-180 | 0-180 mm w.c. | Blue oil, 1.91 s.g. |
| M-700Pa | 10-0-700 Pa | Red oil, .826 s.g. |
*Require Pitot Tube at additional cost. See Flow and Velocity section.
SPECIFICATIONS
Accuracy: ± 3% full scale
Maximum internal working pressure: 10 psi (70 kPa)
Maximum Working temperature: 140°F (60°C)
MODEL CHART ((40-1)-(40-25 mm)-(40-250 Pa)-(41-2)-(41-60 mm)-(41-600 Pa)-(40-1-AV*)-(40-250 Pa-AV*)-(41 -2-AV*))
| Model | Range | Fluid Used |
|---|---|---|
| 40-1 | .1-0-1.0 in. w.c. | Red oil, .826 s.g. |
| 40-25 mm | 0-26 mm w.c. | Red oil, .826 s.g. |
| 40-250 Pa | 10-0-250 Pa | Red oil, .826 s.g. |
| 41-2 | .2-0-2.4 in. w.c. | Blue oil, 1.91 s.g. |
| 41-60 mm | 0-60 mm w.c. | Blue oil, 1.91 s.g. |
| 41-600 Pa | 0-180 mm w.c. | Blue oil, 1.91 s.g. |
| 40-1-AV* | 0-1.1 in. w.c. & 0-4200 fpm | Red oil, .826 s.g. |
| 40-250 Pa-AV* | 0-260 Pa & 0-21 mps | Red oil, .826 s.g. |
| 41 -2-AV* | 0-2.5 in w.c. & 0-6300 fpm | Blue oil, 1.91 s.g. |
*Require Pitot Tube at additional cost. See Flow and Velocity section.
SPECIFICATIONS
Accuracy: ± 3% full scale
Maximum internal working pressure: 15 psi (100kPa)
Maximum working temperature: 130°F (54°C)
Scale length: Approx. 8 ¼" (21 centimeters)