Protect pumps and valves from dry running with the Series TSP Liquid Flow Controller. The Series TSP combine a liquid flow switch with fail-safe relay controller to detect a flow or no flow situation and provides switching for direct actuation of pumps and valves. Controller features adjustable time delay, selectable NO or NC operation, and LED indication of sensor, relay, and power status. Select models are designed with an integral flash alarm to provide immediate indication of local alarm conditions.
| Model | Dim "A" | Dim "B" | Dim "C" |
|---|---|---|---|
| TSP110 TSP210 TSP120 TSP220 TSP110S TSP210S TSP120S TSP220S |
6.5" (16.5 cm) 6.5" (16.5 cm) 7.9" (20 cm) 7.9" (20 cm) 8.3" (21 cm) 8.3" (21 cm) 9.8" (25 cm) 9.8" (25 cm) |
1.3" (3.3 cm) 1.3" (3.3 cm) 2.8" (7 cm) 2.8" (7 cm) 1.3" (3.3 cm) 1.3" (3.3 cm) 2.8" (7 cm) 2.8" (7 cm) |
0.7" (1.8 cm) 0.7" (1.8 cm) 2.1" (5.3 cm) 2.1" (5.3 cm) 0.7" (1.8 cm) 0.7" (1.8 cm) 2.1" (5.3 cm) 2.1" (5.3 cm) |
| Relay Output: | 1 SPDT Form C, isolated and sealed |
|---|---|
| Relay Load: | 250 VAC, 10 A resistive, ½ hp |
| Switching Mode: | Selectable NO or NC |
| Supply Voltage: | 120/240 VAC, 50/60 Hz., selectable |
| Current Consumption: | 25 amps maximum |
| Time Delay: | Adjustable, 0.15 to 60 seconds |
| Sensor Voltage Supply: | 13 VDC, 1 Watt max., nominal |
| Sensor Trigger Point: | Dry <10 mA, wet> 10 mA |
| Sensor Input: | Terminal block |
| Flash Type: | Xenon tube |
| Flash Frequency: | 1 per second |
| Brightness: | >50,000 CP |
| Strobe Life: | 10M cycles |
| Conduit Connection: | ½" NPT |
| Mounting Connection: | ¾" NPT |
| Enclosure: | Polypropylene, flame retardant, NEMA 4X/IP65 |
| Enclosure Rotation: | 300° swivel base |
| Temperature Range: | -40 to 158°F (-40 to 70°C) |
| Model Number | Flash Alarm | Material | Sensor length |
|---|---|---|---|
| TSP110 TSP210 TSP120 TSP220 TSP110S TSP210S TSP120S TSP220S |
No No No No Yes Yes Yes Yes |
PP PVDF PP PVDF PP PVDF PP PVDF |
Short Short Long Long Short Short Long Long |