Proportioning Solenoid Valve- Series SVP
Low Cost, Stainless Steel Construction 0-24 VDC Input
The Series SVP is a low cost, uniquely designed solenoid valve which controls or regulates flow in proportion to a variable voltage input. While most solenoid valves simply provide on/off service, this unit adds a totally new dimension to solenoid valve performance. Reaching to a 0-24 VDC input signal, the valve opens in proportion to the voltage applied, delivering just the right amount of flow needed. Compatible with a wide range of gases and liquids, this unit provides the solution to even the most demanding applications like process control, chemical mixing, high tech manufacturing and laboratory testing. Add a downstream sensing element and Dwyer Series 1600 Process Controller and you have a complete closed loop control system. Another quality feature of this valve is it's tight shut-off (NC) when de-energized.
| Voltage Input | 0-24 VDC |
|---|---|
| Max Operating Current | 400 mA |
| Electrical Connections | Male spade type |
| Wetted Materials | 316 and 416 stainless steel, Viton O-rings |
| Maximum Pressure | 500 psig (34.45 bar) |
| Maximum Differential Pressure | 50 psid (3.45 bar) |
| Process Temperature Limits | -40 to 174°F (-40 to 79°C) |
| Ambient Temperature Limits | -40 to 130°F (-40 to 54°C) |
| Type of Operation | Normally closed valve will close when de-energized |
| Connections | ¼" compression fitting |
| Weight | 12 ounces (340 grams) |