True RMS 0-250 VAC Meter (Model PD695)
The PD695 is a True RMS AC Volt Meter. It can handle low mV inputs such as 50 mV or high voltage inputs up to 250 VAC. The True RMS feature allows non-sinusoidal waveforms to be measured with high accuracy. The unit displays this signal in engineering units on a 4-1/2 digit display that also includes an extra zero which may be used to handle numbers up to 299,990.
- Features
- Ordering Information
- Specifications
True RMS 0-250 VAC Meter(Model PD695)
|
 |
Noise Filter
The field selectable noise filter allows the meter to be programmed so that an unsteady (noisy) input can be displayed with greater stability.
Ordering Information(Model PD695)
| Model | Description |
|---|---|
| 115 VAC | |
| *PD695-3-N | No Options |
| PD695-3-14 | 2 Relays |
| PD695-3-15 | 4-20 mA Output |
| PD695-3-16 | 2 Relays + 4-20 mA Output |
| PD695-3-17 | 4 Relays |
| PD695-3-18 | 4 Relays + 4-20 mA Output |
| 230 VAC | |
| PD695-4-N | No Options |
| PD695-4-14 | 2 Relays |
| PD695-4-15 | 4-20 mA Output |
| PD695-4-16 | 2 Relays + 4-20 mA Output |
| PD695-4-17 | 4 Relays |
| PD695-4-18 | 4 Relays + 4-20 mA Output |
Note: * Quick Shipment Item, shipped within 2 working days.
Most other products shipped within 1 week, call for best shipping date.
Model: PD695
- INPUTS: Field Selectable: 50 mV, 200 mV, 2 V, 20 V, 250 V
- INPUT FREQUENCY RESPONSE: 10 Hz to 30 KHz
- DISPLAY: Bright, large, 0.56" (14.2mm) high efficiency red LED. 4 1/2 digits + extra zero may be switched on to display 29,999(0). Leading zeros blanked.
- DISPLAY UPDATE: 2 times per second
- CREST FACTOR: up to 5:1
- ACCURACY: +/-0.1% of full scale @ 60 Hz
- RESOLUTION: 0.025% of full scale
- HOLD READING or EXTERNAL ACKNOWLEDGE: Connect ACK/HLD and COM terminals, and select jumper pins JP5 on rear.
- LOOP POWER: Isolated 24 VDC @ 20 mA regulated +/-5%. Noise less than 10 mV p-p. Max. loop resistance of 1200 ohms. Available for the 4-20 mA output option.
- NON-VOLATILE MEMORY: All programming values are stored in non-volatile memory for ten years if power is lost.
- LOCKOUT: Jumper JP6 restricts modification of calibration values.
- INPUT IMPEDANCE: Greater than 1 Mohm
- POWER: 115 VAC or 230 VAC +/-10%, 50/60 Hz, 10 VA
- ENCLOSURE: 1/8" DIN, high impact plastic, UL 94V-0
- FRONT PANEL: NEMA 4X, panel gasket provided.
- CONNECTIONS: Removable screw terminal block (provided).
North California Office :- 285-A Bel Marin Keys Blvd - Novato, CA - 94949 PH: (415) 382 - 9710 FAX: (415) 382 - 9720