Mounting Kits and Dimensions
PDA6844 Panel Mounting Kit
PDA6845 Pipe Mounting Kit
PD118 PD660 PD677 PD690-PD696
PD128 PD661 PD678 PD697
PD141AFO PD673 PD680 PD698
PD650 PD674 PD682 PD750-PD752
PD655 PD675 PD686  
PD656 PD676 PD687  
Ordering Information
Model: Description:
PDA6504 PD650 Panel Mounting Kit
PDA6504 PD655 Panel Mounting Kit
PDA6844 NEMA 4X Panel Mounting Kit
fits the PD675, PD676, PD686, PD697
PDA6845 2" Pipe Mounting Kit
fits the PD675-PD678, PD686, PD687, PD697, PD698, PDA2407, PDA2408
  • PDA6504
  • PDA6844
  • PDA6845
  • PD118, PD128, PD673, PD674, PD690-PD696, PD750-PD752
  • PD680, PD682
  • PD141AFO
  • PD687
  • PD650
  • PD675, PD676, PD686, PD697, PD660
  • PD677, PD678, PD698, PD661
  • PD655
  • PD656
PDA6504 Panel Mounting Kit
PDA6554 Panel Mounting Kit
Please call a representative at 877-285-3600 for details.
PDA6844 Panel Mounting Kit
PDA6844 Panel Mounting Kit
Instructions
  1. Insert the meter through the mounting plate.
  2. Insert gasket behind mounting plate.
  3. Mount the assembly on panel.
  4. Secure with four brackets and 4 screws ant corners of the meter.
  5. Use washers as needed for panel thickness.
Notes:
  1. Allowable panel thickness: .060"-125".
  2. Panel cutout required: 5.45" x 3.06".
  3. Mounting plate overall dimensions: 6.43" x 4.05" x .125".
  4. Mounting brackets require .250" on either top or side of meter for installation.
PDA6845 Pipe Mounting Kit
PDA6845 Panel Mounting Kit
PD118, PD128, PD673, PD674, PD690-PD696, PD750-PD752 Panel Mounting Dimensions
Mounting Diagram Height:
Width:
Depth:
Installed Width:
Required for Install:

Weight::

2.30" (59mm)
4.25" (108mm)
6" (152mm)
4.30" (109mm)
4.83" (123mm)

16oz (454g)

Notes:
  1. Panel cutout required- 1.772" x 3.622" (45mm x 92mm) 1/8 DIN
  2. Panel thickness- .125"-.250" (3.17mm-6.34mm)
  3. Allow 6 inches (152mm) behind panel
PD680, PD682
Height:
Width:
Depth:
Installed Width:
Required for Install:

Weight::

1.88" (48mm)
3.82" (97mm)
6" (152mm)
4.30" (109mm)
4.83" (123mm)

12oz (340g)

Mounting Diagram
Notes:
  1. Panel cutout required- 1.772" x 3.622" (45mm x 92mm) 1/8 DIN
  2. Panel thickness- .060"-.250" (1.52mm-6.34mm)
  3. Allow 6 inches (152mm) behind panel
PD141AFO
Height:
Width:
Depth:
Installed Height:
Required for Install:

Weight::

4.25" (108mm)
2.30" (59mm)
6" (152mm)
4.30" (109mm)
4.83" (123mm)

12oz (340g)

PD141AFO Mounting Diagram

Notes:
  1. Panel cutout required-  3.622" x 1.772"(92mm x 45mm) 1/8 DIN
  2. Panel thickness- .125"-.250" (3.17mm-6.34mm)
  3. Allow 6 inches (152mm) behind panel
PD687

PD687mnt.gif (10387 bytes)

Notes:
  1. UL and CSA approved enclosure
  2. Weight: 2lbs
PD650
Dimensions Mounting Dimensions
A:
B:
C:
D:
E:
F:

Weight:

4.92"
14.25"
3.22"
13.49"
3.19"
.79"

7 lbs.

PD675, PD676, PD686, PD697, PD660
Dimensions
(all of the above except PD660)		 Mounting Dimensions
A:
B:
C:
D:

Weight:

3.15"
5.51"
2.36"
4.72"

14oz (397g)

Dimensions (PD660)
A:
B:
C:
D:

Weight:

  

3.15"
4.33"
2.36"
3.54"

12oz (340g)
PD677, PD678, PD698, PD661
Dimensions
(all of the above except PD661)

A:
B:
C:
D:

Weight:

5.62"
5.62"
5.43"
4.06"

6 lbs

Mounting Diagram

FM and CSA approved enclosure

Dimensions (PD661)

A:
B:
C:
D:

Weight:

FM and CSA approved enclosure:

 

4.75"
3.75"
4.5"
- 4 lbs

PD655
There are four mounting holes on the rear of the enclosure that are used to mount the instrument to a wall. The dimensions for the mounting holes are shown in the following figure.
PD656
The enclosure contains two 3/4" NPT conduit holes located at opposite sides. The electronics inside the enclosure can be rotated 90o in any direction allowing the enclosure to receive vertical or horizontal conduit entry.
quotation
Back To Previous Page Take Me Home Send Us A Message Datatools - On Line Reference Resources    

This Day In History

Site Search
North California Office :- 285-A Bel Marin Keys Blvd - Novato, CA - 94949 PH: (415) 382 - 9710 FAX: (415) 382 - 9720
- © FLW, Inc 1997- - S.D.G.