Universal Process Meter
Precision Digital's Model PD690 is a high performance, easy to use, industrial-grade microprocessor digital process meter. It accepts all the standard process signals: 4-20 mA, 1-5 V, 0-5 V and 0-10 V and displays these signals in engineering units on a 4-1/2 digit display. The display includes an extra zero which may be used to handle numbers up to 199,990.
- Features
- Ordering Information
- Specifications
Universal Process Meter(Model PD690)
- Easy Single Button Scaling with Lockout Feature
- 4-20 mA, 0-5 V, or 0-10 V Field Selectable Inputs
- 24 V Transmitter Power Supply Standard
- Stand Alone Scaling
- Steady, Accurate Display to +/- 199,990
- 11 Point Linearization
- Square Root Extraction
- 4-1/2 Digit + Extra Zero
- NEMA 4X Front Panel
- 2 or 4 Relay + 4-20 mA Output Options
- Isolated 18-36 VDC Powered Option
- Green Display Available
- Easy Setup Instructions on Meter
Ordering Information(Model PD690)
| Model: | Description: |
|---|---|
| 115 VAC | |
| *PD690-3-N | No Options |
| *PD690-3-14 | 2 Relays |
| *PD690-3-15 | 4-20 mA Output |
| *PD690-3-16 | 2 Relays + 4-20 mA Output |
| *PD690-3-17 | 4 Relays |
| *PD690-3-18 | 4 Relays + 4-20 mA Output |
| 230 VAC | |
| PD690-4-N | No Options |
| PD690-4-14 | 2 Relays |
| PD690-4-15 | 4-20 mA Output |
| PD690-4-16 | 2 Relays + 4-20 mA Output |
| PD690-4-17 | 4 Relays |
| PD690-4-18 | 4 Relays + 4-20 mA Output |
| 18-36 VDC | |
| PD690-2-N | No Options |
| PD690-2-14 | 2 Relays |
| PD690-2-15 | 4-20 mA Output |
| PD690-2-16 | 2 Relays + 4-20 mA Output |
| PD690-2-17 | 4 Relays |
| PD690-2-18 | 4 Relays + 4-20 mA Output |
* Quick Shipment Item, shipped within two working days
Most other products shipped within one week, call for best shipping date.
Note: A -G may be added in the part number to call out meters with a green display ex. PD690-3G-14;
Options:
| Model: | Description: |
|---|---|
| PD174 | 2 Relay Option (-14 in P/N) |
| PD175 | 4-20 mA Output Option (-15 in P/N) |
| PD176 | 2 Relays + 4-20 mA Output (-16 in P/N) |
| PD177 | 4 Relays Output Option (-17 in P/N) |
| PD178 | 4 Relays + 4-20 mA Output (-18 in P/N) |
| PDX-6901 | Snubber |
Basic Meter
- INPUTS: Field selectable, 4-20 mA, 1-5 V, 0-5 V, 0-10 V.
- DISPLAY: Bright, Large, 0.56" (14.2mm) high efficiency red or green LED. 4-1/2 digits + extra zero; +/- 19999(0), (0) may be switched on to display 199,990.
- FRONT PANEL: NEMA 4X, panel gasket provided.
- CALIBRATION: May be calibrated using internal calibration (I-CAL) or by applying an external calibration signal (E-CAL).
- CALIBRATION RANGE: 4 mA (1V) input may be set to display anywhere in range of meter. 20 mA (5V) may be set anywhere above or below 4 mA input. Non-volatile Memory: All programming values are stored in non-volatile memory for ten years if power is lost.
- LOCKOUT: Jumper 3 at rear of instrument restricts modification of calibration values.
- LOOP POWER: (AC powered units only) Isolated 24VDC at 20 mA regulated. Noise less than 10 mV p-p. Max loop resistance of 1200 ohms. Available for either signal input or 4-20 mA output option, but not both.
- HOLD READING: Connect terminals HLD and COM.
- ACCURACY: 05% of calibrated span.
- INPUT IMPEDANCE: Voltage ranges, greater than 300 Kohms; Current range, 100 ohms.
- POWER: AC power: 115 VAC +/- 10%, 50/60 Hz, 10VA. 230 VAC +/- 10%, 50/60 Hz, 10VA. DC power: 18-36 VDC, 6 watts max.
- ISOLATION: AC power: 1500 VAC; DC power: 500 VDC.
- ENVIRONMENTAL: Operating temperature range: 0 to 65¡C. Storage temperature range: -40 to 85ûC. Relative Humidity: 0 to 90% non-condensing.
- ENCLOSURE: 1/8 DIN, high impact plastic, UL 94V-0.
- CONNECTIONS: Removable screw terminal block (provided).
- ALARM POINTS: 4, any combination of high or low alarms.
- ALARM STATUS INDICATION: Front panel LED.
- ALARM DEADBAND: 0-100%, User Selectable.
- UL FILE NUMBER: E160849; 508 Industrial Control Equipment.
Relays
- RATING: 2 or 4 relays; 2 Amp SPDT (form C). The contacts are rated 2 Amp @ 30 VDC or 2 Amp @ 250 VAC resistive load; 1/14 HP @ 125 / 250 VAC for NC contacts and 1/10 HP @ 125 / 250 VAC for NO contacts, inductive load.
- RESET: User Select. 1. Automatically when the input passes the reset point. 2. Automatically + manually (via user supplied switch or front panel ACK button).
- FAILSAFE OPERATION: The relay coils are energized in the non-alarm condition. In the case of a power failure, the relays will go to the alarm state. May be disabled with internal jumper.
- AUTO INITIALIZATION: When power is applied to the meter, the relays will always reflect the state of the input to the meter.
- DEADBAND: 0-100%, User Selectable.
Isolated 4-20 mA Transmitter Output
- CALIBRATION RANGE: Anywhere in range of meter, 501 count minimum span.
- OUTPUT LOOP RESISTANCE:
| Loop Resistance | ||
|---|---|---|
| Power Supply | Min | Max |
| 24 VDC | 10 ohm | 600 ohm |
| 36 VDC (external) | 600 ohm | 1000 ohm |
- ISOLATION: 500 VDC or peak AC, input-to-output or input/output-to-power line.
- EXTERNAL LOOP POWER SUPPLY: 35 V max.
North California Office :- 285-A Bel Marin Keys Blvd - Novato, CA - 94949 PH: (415) 382 - 9710 FAX: (415) 382 - 9720