0-200 VDC Meter
The PD694 DC Volt Meter accepts 0-200 VDC and displays this signal in engineering units on a 4-1/2 digit display. The display also includes an extra zero which may be used to handle numbers up to 199,990.
- Features
- Ordering Information
- Specifications
0-200 VDC Meter(Model PD694)
- 0-200 VDC Input
- 24 V Transmitter Power Supply Standard
- Steady, Accurate Display to 199,990
- 4-1/2 Digit + Extra Zero
- NEMA 4X Front Panel
- 2 or 4 Relays + 4-20 mA Output Options
- Green Display Available
Ordering Information(Model PD694)
| Model: | Description: |
|---|---|
| 115 VAC | |
| *PD694-3-N | No Options |
| *PD694-3-14 | 2 Relays |
| PD694-3-15 | 4-20 mA Output |
| PD694-3-16 | 2 Relays + 4-20 mA Output |
| PD694-3-17 | 4 Relays |
| PD694-3-18 | 4 Relays + 4-20 mA Output |
| 230 VAC | |
| PD694-4-N | No Options |
| PD694-4-14 | 2 Relays |
| PD694-4-15 | 4-20 mA Output |
| PD694-4-16 | 2 Relays + 4-20 mA Output |
| PD694-4-17 | 4 Relays |
| PD694-4-18 | 4 Relays + 4-20 mA Output |
| 18-36 VDC | |
| PD694-2-N | No Options |
| PD694-2-14 | 2 Relays |
| PD694-2-15 | 4-20 mA Output |
| PD694-2-16 | 2 Relays + 4-20 mA Output |
| PD694-2-17 | 4 Relays |
| PD694-2-18 | 4 Relays + 4-20 mA Output |
Note: A -G may be added in the part number to call out meters with a green display, ex. PD694-3G-14.
Model: PD694
- INPUTS: 0-200 VDC
- DISPLAY: Bright, large, 0.56" (14.2mm) high efficiency red or green LED 4-1/2 digits + extra zero may be switched on to display +/-19,999(0). Leading zeros blanked.
- CALIBRATION RANGE: 0 VDC input may be set anywhere in range of the meter. 200 VDC may be set anywhere above or below 0 VDC input. An Error message will appear if input 1 and input 2 signal are within 5 VDC.
- LOOP POWER: Isolated 24 VDC @ 20 mA regulated +/-5%. Noise less than 10 mV p-p. Max. loop resistance of 1200 ohms. Available for the 4-20 mA output option. (AC powered units only)
- ACCURACY: 0.05% of calibrated span, +/-1 count.
Non-voLatile Memory: All programming values are stored in non-volatile memory for ten years if power is lost.
- LOCKOUT: Jumper J3 restricts modification of calibration values.
- INPUT IMPEDANCE: Greater than 1 Mohms.
- POWER:
| AC power: | 115 VAC +/-0%, 50/60 Hz, 10VA. | |
|---|---|---|
| 230 VAC ± 10%, 50/60 Hz, 10VA. | ||
| DC power: | 18-36 VDC, 6 watts max. | |
- ISOLATION: AC power: 1500 VAC, DC power: 500 VDC.
- COMMON MODE REJECTION: 110 db.
- NORMAL MODE REJECTION: 64 db. at 50-60 Hz
- ENCLOSURE: 1/8" DIN, high impact plastic, UL 94V-0.
- FRONT PANEL: NEMA 4X, panel gasket provided.
- CONNECTIONS: Removable screw terminal block (provided).
- ALARM POINTS: 4, any combination of high or low alarms.
- ALARM STATUS INDICATION: Front panel LED.
- ALARM DEADBAND: 0-100% F.S. user selectable.
- UL FILE NUMBER: (E160849; 508 Industrial Control Equipment.
North California Office :- 285-A Bel Marin Keys Blvd - Novato, CA - 94949 PH: (415) 382 - 9710 FAX: (415) 382 - 9720