Model PD694

0-200 VDC Meter

The PD694 DC Volt Meter accepts 0-200 VDC and displays this signal in engineering units on a 4-1/2 digit display. The display also includes an extra zero which may be used to handle numbers up to 199,990.

Features   Specifications   Order Info

Features

• 0-200 VDC Input
• 24 V Transmitter Power Supply Standard
• Steady, Accurate Display to 199,990
• 4-1/2 Digit + Extra Zero
• NEMA 4X Front Panel
• 2 or 4 Relays + 4-20 mA Output Options
• Green Display Available

Top   Features   Specifications   Order Info

Ordering Information

Model:	Description
115 VAC
PD694-3-N	No Options
PD694-3-14	2 Relays
PD694-3-15	4-20 mA Output
PD694-3-16	2 Relays + 4-20 mA Output
PD694-3-17	4 Relays
PD694-3-18	4 Relays + 4-20 mA Output
230 VAC
PD694-4-N	No Options
PD694-4-14	2 Relays
PD694-4-15	4-20 mA Output
PD694-4-16	2 Relays + 4-20 mA Output
PD694-4-17	4 Relays
PD694-4-18	4 Relays + 4-20 mA Output
18-36 VDC
PD694-2-N	No Options
PD694-2-14	2 Relays
PD694-2-15	4-20 mA Output
PD694-2-16	2 Relays + 4-20 mA Output
PD694-2-17	4 Relays
PD694-2-18	4 Relays + 4-20 mA Output

Note: A -G may be added in the part number to call out meters with a green display, ex. PD694-3G-14.

Top   Features   Specifications   Order Info

Specifications

• INPUTS: 0-200 VDC
  
• DISPLAY: Bright, large, 0.56" (14.2mm) high efficiency red or green LED 4-1/2 digits + extra zero may be switched on to display +/-19,999(0). Leading zeros blanked.
  
• CALIBRATION RANGE: 0 VDC input may be set anywhere in range of the meter. 200 VDC may be set anywhere above or below 0 VDC input. An Error message will appear if input 1 and input 2 signal are within 5 VDC.
  
• LOOP POWER: Isolated 24 VDC @ 20 mA regulated +/-5%. Noise less than 10 mV p-p. Max. loop resistance of 1200 ohms. Available for the 4-20 mA output option. (AC powered units only)
  
• ACCURACY: 0.05% of calibrated span, +/-1 count.
  Non-voLatile Memory: All programming values are stored in non-volatile memory for ten years if power is lost.
  
• LOCKOUT: Jumper J3 restricts modification of calibration values.
  
• INPUT IMPEDANCE: Greater than 1 Mohms.
• POWER:

  	AC power:	115 VAC +/-0%, 50/60 Hz, 10VA. 230 VAC ± 10%, 50/60 Hz, 10VA.
  	DC power:	18-36 VDC, 6 watts max.

  
  
• ISOLATION: AC power: 1500 VAC, DC power: 500 VDC.
  
• COMMON MODE REJECTION: 110 db.
  
• NORMAL MODE REJECTION: 64 db. at 50-60 Hz
  
• ENCLOSURE: 1/8" DIN, high impact plastic, UL 94V-0.
  
• FRONT PANEL: NEMA 4X, panel gasket provided.
  
• CONNECTIONS: Removable screw terminal block (provided).
  
• ALARM POINTS: 4, any combination of high or low alarms.
  
• ALARM STATUS INDICATION: Front panel LED.
  
• ALARM DEADBAND: 0-100% F.S. user selectable.
  
• UL FILE NUMBER: E160849; 508 Industrial Control Equipment.

Top   Features   Specifications   Order Info