Leighton Stone Corporation
Menu BarHomeAbout UsE-MailProductsSearchServicesBackMenu Bar

Precision Digital
Mounting Kits
PDA6844 Panel Mounting Kit
PDA6845 Pipe Mounting Kit

Mounting Dimensions

PD118 PD660 PD677 PD690-PD696
PD128 PD661 PD678 PD697
PD141AFO PD673 PD680 PD698
PD650 PD674 PD682 PD750-PD752
PD655 PD675 PD686  
PD656 PD676 PD687  

Order Info    Specifications

Ordering Information

Model: Description:
PDA6504 PD650 Panel Mounting Kit
PDA6504 PD655 Panel Mounting Kit
PDA6844 NEMA 4X Panel Mounting Kit
fits the PD675, PD676, PD686, PD697
PDA6845 2" Pipe Mounting Kit
fits the PD675-PD678, PD686, PD687, PD697, PD698, PDA2407, PDA2408

Top    Specifications    Order Info

Specifications

PDA6504 Panel Mounting Kit


PDA6554 Panel Mounting Kit

Please call a representative at 877-285-3600 for details.

PDA6844 Panel Mounting Kit

PDA6844 Panel Mounting Kit
Instructions
  1. Insert the meter through the mounting plate.
  2. Insert gasket behind mounting plate.
  3. Mount the assembly on panel.
  4. Secure with four brackets and 4 screws ant corners of the meter.
  5. Use washers as needed for panel thickness.
Notes:
  1. Allowable panel thickness: .060"-125".
  2. Panel cutout required: 5.45" x 3.06".
  3. Mounting plate overall dimensions: 6.43" x 4.05" x .125".
  4. Mounting brackets require .250" on either top or side of meter for installation.
PDA6845 Pipe Mounting Kit
PDA6845 Panel Mounting Kit
Mounting Dimensions
PD118, PD128, PD673, PD674, PD690-PD696, PD750-PD752
Mounting Diagram Height:
Width:
Depth:
Installed Width:
Required for Install:

Weight::

2.30" (59mm)
4.25" (108mm)
6" (152mm)
4.30" (109mm)
4.83" (123mm)

16oz (454g)

Notes:
  1. Panel cutout required- 1.772" x 3.622" (45mm x 92mm) 1/8 DIN
  2. Panel thickness- .125"-.250" (3.17mm-6.34mm)
  3. Allow 6 inches (152mm) behind panel
PD680, PD682
Height:
Width:
Depth:
Installed Width:
Required for Install:

Weight::

1.88" (48mm)
3.82" (97mm)
6" (152mm)
4.30" (109mm)
4.83" (123mm)

12oz (340g)

Mounting Diagram
Notes:
  1. Panel cutout required- 1.772" x 3.622" (45mm x 92mm) 1/8 DIN
  2. Panel thickness- .060"-.250" (1.52mm-6.34mm)
  3. Allow 6 inches (152mm) behind panel
PD141AFO
Height:
Width:
Depth:
Installed Height:
Required for Install:

Weight::

4.25" (108mm)
2.30" (59mm)
6" (152mm)
4.30" (109mm)
4.83" (123mm)

12oz (340g)

PD141AFO Mounting Diagram

Notes:
  1. Panel cutout required-  3.622" x 1.772"(92mm x 45mm) 1/8 DIN
  2. Panel thickness- .125"-.250" (3.17mm-6.34mm)
  3. Allow 6 inches (152mm) behind panel
PD675, PD676, PD686, PD697, PD660
Dimensions
(all of the above except PD660)		 Mounting Dimensions
A:
B:
C:
D:

Weight:

3.15"
5.51"
2.36"
4.72"

14oz (397g)

Dimensions (PD660)
A:
B:
C:
D:

Weight:

  

3.15"
4.33"
2.36"
3.54"

12oz (340g)
PD687

PD687mnt.gif (10387 bytes)

Notes:
  1. UL and CSA approved enclosure
  2. Weight: 2lbs
PD677, PD678, PD698, PD661
Dimensions
(all of the above except PD661)

A:
B:
C:
D:

Weight:

5.62"
5.62"
5.43"
4.06"

6 lbs

Mounting Diagram

FM and CSA approved enclosure

Dimensions (PD661)

A:
B:
C:
D:

Weight:

FM and CSA approved enclosure:

 

4.75"
3.75"
4.5"
-

4 lbs

PD650
Dimensions
A:
B:
C:
D:
E:
F:

Weight:

4.92"
14.25"
3.22"
13.49"
3.19"
.79"

7 lbs.

PD655

There are four mounting holes on the rear of the enclosure that are used to mount the instrument to a wall. The dimensions for the mounting holes are shown in the following figure.

PD656

The enclosure contains two 3/4" NPT conduit holes located at opposite sides. The electronics inside the enclosure can be rotated 90o in any direction allowing the enclosure to receive vertical or horizontal conduit entry.

Top    Specifications    Order Info


Back